Typical buyers pay for both the MrCool unit and professional installation; this article lists MrCool price ranges and installation cost drivers to help plan a budget. The MrCool AC prices and installation cost depend on system size, line-set length, number of zones, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 1.5-ton (single‑zone) mini‑split | $900 | $1,400 | $2,200 | Assumptions: basic unit, 10–15 ft line set, standard wall mount. |
| 2.0-ton (single‑zone) mini‑split | $1,100 | $1,900 | $3,000 | Assumptions: mid-efficiency model, typical install. |
| 2‑zone multi‑split (2×1.5t heads) | $2,200 | $3,800 | $6,000 | Assumptions: two heads, 20–35 ft combined line length. |
| 3‑zone multi‑split (3×1.5t heads) | $3,400 | $5,500 | $9,500 | Assumptions: three heads, more complex routing. |
Typical MrCool 1–2 Ton Single‑Zone Price And What It Includes
MrCool single‑zone 1.5–2.0 ton systems are common for medium rooms and small apartments; buyers typically pay $900‑$3,000 for the unit plus $600‑$2,000 for installation depending on access and extras. Typical total out‑the‑door price for a basic 1.5‑2 ton install is $1,500‑$3,500 with standard labor and short run lengths.
Assumptions: interior head on wall bracket, outdoor condenser on pad, up to 25 ft combined line set, standard electrical within 10 ft.
Materials Labor Permits Disposal In A MrCool Quote
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $900‑$2,500 (unit cost) | $500‑$1,800 (install labor) | $75‑$300 (crane, lift, specialty tools) | $0‑$250 (local permit) | $50‑$300 (old unit removal) |
Materials are usually the single largest line item, but labor can match or exceed materials in complex installs.
Assumptions: Midwest labor rates, typical materials, normal access.
Capacity Line Length And Wall Material That Change MrCool Prices
Capacity: moving from a 1.5 ton (18,000 BTU) to a 2.5–3 ton (30,000–36,000 BTU) unit increases unit cost roughly 30‑70% and may require heavier electrical, raising labor by $300‑$1,000. Expect $300‑$1,500 extra when upgrading above 24,000 BTU due to larger condensers and electrical work.
Line length: standard pricing covers up to 25 ft of line set; add $4‑$9 per ft beyond that. Numeric threshold: >25 ft = $4‑$9 per additional ft; >50 ft often requires refrigerant charge or larger line size and can add $300‑$1,000.
Wall material: cutting through vinyl siding or drywall is inexpensive, but brick, stucco, or load‑bearing walls add $150‑$700 in labor and patching costs.
Lower MrCool Installation Cost By Controlling Scope And Timing
Choose a single‑zone head where effective or defer cosmetic covers and paint until after installation; bundling multiple rooms often saves per‑head labor. Scheduling in shoulder seasons (spring/fall) can reduce labor rates and lead times compared with peak summer demand.
Other scope controls: run outdoor unit on existing dedicated circuit when safe ($0‑$300) instead of installing new panel work ($500‑$1,800+), and opt for standard wall sleeve rather than recessed mounting to cut $200‑$800.
Don’t Overpay for HVAC Services – Call 888-894-0154 Now to Compare Local Quotes!
MrCool Prices By Region Northeast Midwest South West
Regional deltas are typically 5‑25% due to labor and permit differences. Expect the Northeast and West Coast to be 10‑25% higher than Midwest averages; South and parts of rural areas can be 5‑15% lower.
| Region | Relative Delta | Example Total Range (single‑zone) |
|---|---|---|
| Northeast | +10‑25% | $1,700‑$4,400 |
| Midwest | ±0% | $1,500‑$3,500 |
| South | −5‑15% | $1,300‑$3,000 |
| West | +8‑22% | $1,600‑$4,300 |
Typical Labor Hours Crew Size And Rates For MrCool Installs
Single‑zone install: 2‑6 hours with a two‑person crew is typical; multi‑zone installs often require 8‑24 hours and a 2–3 person crew. Standard hourly rates range $75‑$125 per hour per tech depending on region and company.
Example calculation: a 4‑hour two‑tech job at $95/hr = 4 × 2 × $95 = $760 labor.
Common Add‑Ons Removal And Diagnostic Fees For MrCool Jobs
Common extras include line set extensions ($4‑$9/ft), electrical upgrades ($500‑$1,800), condensate pumps ($150‑$350), pad or wall bracket upgrades ($75‑$250), and disposal of old equipment ($50‑$300). Diagnostic or troubleshooting visits often carry $75‑$200 fees that may be credited if the installer gets the job.
Rush jobs and weekend installs add $150‑$500. Warranty or extended maintenance plans add $100‑$400 annually depending on coverage.
How to Get the Best HVAC Prices
- Firstly, keep in mind that installation quality is always the most important thing for residential HVAC project. So never sacrifice contractor quality for a lower price.
- Secondly, remember to look up the latest rebates as we talked above.
- Thirdly, ask for at least 3 bids before you make the decision. You can click here to get 3 free estimates from your local contractors, and this estimate already takes rebates and tax credit into consideration and filter unqualified contractors automatically.
Lastly, once you chose the right contractor, remember to use the tactics from this guide: Homeowners Tactics When Negotiating with HVAC Dealer to get the final best price.
