The single-zone residential mini-split systems offered by Samsung usually range between $1,300 and 4,000 (equipment only) and the professional installation will cost approximately $1,000 to 3,000.
Real prices are based on BTU cooling capacity of the unit, size of your room or house, and the number of zones you need inside.
As an example, a single 9,000 BTU Samsung mini-split in one room may cost anywhere between $2,000 and 5,000 installed, but a multi-zone Samsung system in a whole house can cost into the mid five-figure range (e.g. ~$15k to 18k in a five-zone system).
Samsung Mini Split Prices By BTU (Cooling Capacity)
A Samsung ductless mini-split system (indoor wall-mounted air handler and outdoor condenser unit). These small systems are available in different sizes (BTU ratings) to suit different cooling loads of rooms.
The prices of Samsung mini split differ mainly depending on their cooling capacity which is measured in BTUs (British Thermal Units per hour). Typical Samsung single-zone mini-splits are between 9,000 BTU and 36,000 BTU (0.75 and 3 tons).
The small units (e.g. 9,000 BTU) that would be suitable in a bedroom or office are much cheaper than the high capacity units, about $1,200-1,800 for the 9k BTU unit alone. Conversely, a bigger 24,000 BTU Samsung mini split (2-ton capacity to a large living space) may cost around $2,800-4,000 only on the equipment.
The higher BTU models are not only more expensive but also can have a bit more cost on the labor of the installation because of larger refrigerant lines or electrical requirements.
The cost of installation labor on any one-zone Samsung mini split is usually around $500-2,000, depending on the complexity (simple back-to-back installs on an exterior wall are cheaper, and longer line runs or complex wiring are on the more expensive side).
The following is an examination of typical price ranges of common Samsung mini-split sizes with an estimate of equipment cost vs. installed cost. These ranges apply to normal Samsung models; models with premium features (such as WindFree technology or top SEER ratings) may be at the higher end of these ranges. All amounts are in USD:
| BTU Capacity | Recommended Room Size | Equipment Cost | Installed Cost (Estimated) |
|---|---|---|---|
| 9,000 BTU (3/4 Ton) | ~100–400 sq ft | $1,200–$1,800 | $2,000–$3,500 (with installation) |
| 12,000 BTU (1 Ton) | ~400–500 sq ft | $1,500–$2,200 | $2,500–$4,000 (installed) |
| 18,000 BTU (1.5 Ton) | ~500–1,000 sq ft | $2,200–$3,000 | $3,200–$5,000 (installed) |
| 24,000 BTU (2 Ton) | ~1,000–1,400 sq ft | $2,800–$4,000 | $3,800–$6,000 (installed) |
| 36,000 BTU (3 Ton) | ~1,500–2,000 sq ft (open area) | $3,500–$5,000 (typical) | $4,500–$7,000 (installed) |
As indicated above, the more the BTU capacity the more the cost. The smaller 9k-12k BTU units (which are suitable only in a single room or studio) are usually in the low thousands of dollars, whereas a high capacity 3-ton (36k BTU) unit can cost as much as $5,000 just to buy.
Don’t Overpay for HVAC Services – Call 888-894-0154 Now to Compare Local Quotes!
Installation costs do not increase as steeply with size, a single-zone install is usually in the ~$1k-3k range regardless of BTU, but may be a little more on very large units that need heavier wiring or two installers to set up the equipment.
It is important to choose a BTU rating that is appropriate to your space: an undersized unit will not cool the space adequately and an oversized unit will short-cycle and waste energy. The mini-split will be used in most homes in the U.S. in the following common size ranges to satisfy cooling requirements.
Samsung Mini Split Prices By Home Size (Square Footage)
The area of your house (or the place you need to cool/heat) is one of the key factors in selecting the appropriate Samsung mini split system. A rule of thumb in HVAC planning is that you require about 20 to 60 BTU per square foot of cooling, depending on insulation, climate and ceiling height.
This implies, e.g., that a 1,000 sq ft space may need something like 20,000+ BTUs of cooling. Samsung provides mini-split systems that range in single-zone systems to small areas to multi-zone systems that can reach the whole house. In a bigger or multi-room house, you can either install a single high-BTU system to cool an open-concept space or install multiple indoor systems (zones) with a single outdoor compressor (a multi-zone system) to spread cooling.
The approximate price of Samsung mini splits by the size of the home is given below. We give common square-footage categories and a suitable total BTU capacity and the anticipated price range. In small areas, it may be a one-zone unit; in larger houses, it may be a multi-zone Samsung system (two or more indoor air handlers).
The equipment cost indicates the Samsung indoor + outdoor units, whereas the installed cost represents the average U.S. labor and materials:
| Home Size (approx sq ft) | Approx. BTU Capacity | Samsung Equipment Cost | Total Installed Cost |
|---|---|---|---|
| ~300 sq ft (e.g. small room) | 6,000 BTU | $500–$800 (small unit) | $1,000–$1,600 |
| ~600 sq ft (studio or 1-room) | 12,000 BTU | $700–$1,500 | $1,500–$3,200 |
| ~900 sq ft (small apartment) | 18,000 BTU | $2,200–$3,000 | $2,000–$4,000 |
| ~1,200 sq ft (small house) | 24,000 BTU | $2,800–$4,000 | $2,800–$5,200 |
| ~1,800 sq ft (medium house) | 36,000 BTU | $3,500–$5,000 | $4,000–$6,000 |
| ~2,400 sq ft (large house) | 48,000 BTU (multi-zone) | $5,000–$8,000 | $5,000–$10,000 |
These numbers demonstrate that the need to cover a bigger house increases the capacity and price. A small 300-600 sq ft area could just require one Samsung wall-mount unit (~9k-12k BTU) that would cost a few thousand dollars to install.
In the meantime, a 2,000+ sq ft house may need 4 tons (48,000 BTU) of cooling, which in the case of Samsung may mean a multi-zone system with 4-5 indoor units, and cost something like 8,000-12,000+ installed (even up to ~15k in the high-cost case). The above ranges of installed cost are under normal conditions; homes with good insulation in moderate climates may be cooled satisfactorily with the lower range of BTUs per square foot, and homes with poor insulation or those in the South may require the higher range of BTUs (and thus possibly more or larger Samsung units).
Never do a load calculation yourself, always seek a professional HVAC expert to do it correctly, and they will tell you the exact BTU needs of your house and the Samsung mini-split system that will provide the best balance between comfort and cost.
Samsung Mini Split Prices By Number Of Zones
The other method of thinking about Samsung mini split pricing is the number of indoor zones (rooms or areas) you want to condition. A ductless system has a zone (an indoor air handler (evaporator unit) with its own thermostat).
The residential mini-splits made by Samsung are available in single-zone (one indoor unit to one outdoor compressor) or multi-zone (multiple indoor units on a single outdoor unit, such as Samsung Free Joint Multi series that can support 2-5 zones). Multi-zone systems enable you to heat/cool multiple rooms, however, every extra zone increases the cost of both additional indoor unit equipment and a more complicated installation.
A single-zone system is the least expensive system (in the case of Samsung (and similar brands)), and a 5-zone system (max typical per one outdoor unit) is the most expensive.
Based on national averages, one-zone ductless install costs approximately $2,000 to 8,800, three zones cost an average of $3,400 to 13,400, and five zones cost up to 4,800 to 18,000 or more. The pricing of Samsung will tend to be within these ranges, perhaps on the mid-to-high end in case of using their higher-end units per zone.
The following table is a summary of approximate costs by zones:
| Number Of Zones | Typical Samsung Equipment Cost | Total Installed Cost (Average) |
|---|---|---|
| Single-zone (1 indoor unit) | $1,300–$4,000 | $2,000–$6,000 |
| Dual-zone (2 indoor units) | $2,500–$7,000 (combined) | $3,000–$9,000 |
| Three-zone (3 indoor units) | $4,000–$9,000 (combined) | $4,000–$13,000 |
| Four-zone (4 indoor units) | $5,000–$11,000 (combined) | $5,000–$15,000 |
| Five-zone (5 indoor units) | $6,000–$14,000 (combined) | $5,000–$18,000 |
Every extra zone not only needs another Samsung indoor unit (which can be several hundred to a few thousand dollars on its own, depending on the capacity), but also usually a larger or higher-capacity outdoor unit to handle the combined BTUs.
As an example, a dual-zone could have a 24,000 BTU outdoor compressor rather than a 12,000 BTU, which would cost more equipment. More zones also increase installation labor, as it takes longer to run refrigerant lines and wires to several rooms.
Nevertheless, multi-zone Samsung systems may be more economical than the installation of multiple single-zone systems; there are economies of scale in having one outdoor compressor to supply multiple heads. A 5-zone Samsung mini-split system may run about $10,000 to 18,000 installed as a whole-home system, but a single-zone system to serve a single room may be as little as $5,000 total.
Homeowners must consider the price in relation to their requirements, you can begin with one or two essential areas and possibly increase in the future, as Samsung FJM outdoor units may be connected to more indoor units (up to the limit of their capacity).
Key Takeaways:
The U.S. market has a wide range of prices of Samsung mini-split depending on the size of the system. Expect to spend about $3,000 (or so) on a simple small one-zone installation, and be ready to spend $10k or more in case you want to equip a multi-room house with a multi-zone Samsung system.
Never forget to put the unit cost and the cost of installation in your budget. Although the equipment itself may cost a couple of thousand dollars, professional installation is a major extra cost, but it is needed to make sure the system is properly installed, filled with refrigerant, and operating safely and efficiently.
Don’t Overpay for HVAC Services – Call 888-894-0154 Now to Compare Local Quotes!
Taking into consideration BTUs, size of the home, and zones, you will be able to identify the most appropriate Samsung mini-split solution to your home and have a better idea about the costs that you can expect.
How to Get the Best HVAC Prices
- Firstly, keep in mind that installation quality is always the most important thing for residential HVAC project. So never sacrifice contractor quality for a lower price.
- Secondly, remember to look up the latest rebates as we talked above.
- Thirdly, ask for at least 3 bids before you make the decision. You can click here to get 3 free estimates from your local contractors, and this estimate already takes rebates and tax credit into consideration and filter unqualified contractors automatically.
Lastly, once you chose the right contractor, remember to use the tactics from this guide: Homeowners Tactics When Negotiating with HVAC Dealer to get the final best price.
