For buyers who need independent temperature control across four rooms, a 4-zone mini split system delivers targeted cooling and heating without ductwork. Choose Senville or ROVSUN for high-capacity all-in-one outdoor condensers with four indoor handlers; choose Della or COSTWAY when energy efficiency and Alexa/Wi‑Fi support are priorities; choose BRAVO when a ceiling cassette layout is desired. Below is a quick comparison to match systems to common buyer needs.
| Product | Total BTU | Best For |
|---|---|---|
| Senville 36000 BTU Quad Zone | 36,000 | Cold-climate heating and Alexa control |
| ROVSUN 38000 BTU (12K x4) | 38,000 | Larger rooms requiring 12K handlers |
| Della 35K BTU Quad Zone | 35,000 | Mixed room sizes and Alexa/Wi‑Fi |
| COSTWAY 30K BTU Quad Zone | 30,000 | Highest SEER2 and greener refrigerant |
| BRAVO 36,000 BTU 4-Zone Cassette | 36,000 | Ceiling cassette installation for even distribution |
Senville 36000 BTU Quad Zone
Features: Four 9,000 BTU indoor handlers with a single 36,000 BTU outdoor unit, AHRI certified, Arctic Heat Pump operation to -22°F/-30°C, works with Alexa, runs on 208-230V. The system supports individual room temperature control and app/voice operation.
Best for homeowners who need robust low-temperature heating and smart home voice control. Selected for its AHRI certification and stated ability to operate efficiently in very cold climates, which suits northern U.S. regions or heated additions.
Choose this if you need dependable cold-weather heat and Alexa integration. Avoid this if you require non-smart-only controls or prefer a higher SEER2 rating for maximum cooling efficiency.
ROVSUN 38000 BTU 12Kx4 Quad Zone
Features: 38,000 BTU outdoor condenser with four 12,000 BTU indoor handlers, inverter heat pump, pre-charged condenser, 25ft line set, ETL and AHRI certified, multi-mode functions (dehumidifier, turbo, iFEEL, auto defrost) and operating range to -4°F.
Best for larger rooms or open-plan living areas that benefit from 12K handlers per zone. Selected for higher per-handler capacity and a full feature set including turbo and iFEEL modes that improve comfort control in varied spaces.
Choose this if you need stronger per-zone capacity and a pre-charged condenser. Avoid this if your rooms are small and you prefer 9K handlers for finer-grain zoning or lower initial capacity.
Della 35K BTU 4 Zone Mini Split
Don’t Overpay for HVAC Services – Call 888-894-0154 Now to Compare Local Quotes!
Features: 35,000 BTU total with indoor units 9K+9K+9K+18K, 19 SEER2, pre-charged heat pump operable to -13°F/-25°C, Alexa and Wi‑Fi compatibility, DC inverter technology, installation kits and 16ft lines included. Notes that self-cleaning function is not supported despite display option.
Best for mixed-size homes where one zone needs higher capacity (18K) and Wi‑Fi/Alexa integration is required. Selected for its mixed BTU configuration and included installation kits that simplify matching handlers to room sizes.
Choose this if you need one larger zone (e.g., a living room) alongside three standard rooms. Avoid this if you require an actual self-cleaning function; the display may show it but the operation is not performed on this model.
COSTWAY 30K 4 Zone Mini Split
Features: 30,000 BTU total with four 9,000 BTU indoor handlers, 23 SEER2 and 10 HSPF2 ratings, Energy Star certified, R32 refrigerant, ETL and AHRI certified, chassis heating function to operate in -13°F to 125°F, Wi‑Fi enabled and multiple modes including auto/heat/cool/dry/fan/sleep.
Best for buyers prioritizing energy efficiency and a lower global warming potential refrigerant. Selected for the high SEER2 rating and Energy Star designation that indicate reduced energy consumption in cooling season.
Choose this if maximizing seasonal efficiency and using R32 refrigerant is a priority. Avoid this if you need larger per-zone capacity than 9K handlers provide or if your layout requires a mixed-BTU configuration.
BRAVO 36,000 BTU 4-Zone Ceiling Cassette
Features: 36,000 BTU outdoor condenser with four ceiling cassette air handlers (9K+9K+9K+12K), 23 SEER2, includes smart port adapters for smartphone control, 25ft installation kits and pre-flared insulated copper line sets, ETL and AHRI certified, whisper technology for quiet operation.
Best for installations where ceiling cassettes provide even air distribution and minimal wall intrusion. Selected for the cassette format, included high-grade installation kit, and smart control adapters that support remote operation.
Choose this if ceiling-distributed airflow and quiet operation are priorities. Avoid this if wall-mounted units are preferred or if ceiling space and structural considerations prohibit cassette installation.
Buying Guide
What total BTU and per-zone BTU do I need?
Calculate each room’s cooling/heating load by size and usage. Sum the room loads to determine total BTU. Choose per-zone handlers that match individual room needs: 9K for bedrooms, 12K for medium rooms, and 18K for larger living areas. Avoid oversizing a single handler in a small room to prevent short-cycling.
How important is SEER2, HSPF2, and certifications?
SEER2 indicates seasonal cooling efficiency and affects operating costs during summer. HSPF2 reflects heating efficiency. Look for ETL and AHRI certifications to confirm manufacturer test results and performance claims. Higher SEER2 typically reduces electricity use for cooling but may increase upfront cost.
Does low‑temperature performance matter for my climate?
Yes. Heat pump operating range matters if you live in cold climates. Products list minimum ambient temperatures (for example, -22°F or -13°F). Choose units rated for the lowest temperatures you expect to ensure reliable heating without auxiliary heat.
Pre‑charged condensers and line sets — what to expect?
Pre-charged condensers and included line sets simplify installation and reduce installer labor. Confirm included line length (25ft or 16ft are common) and check whether longer runs will require additional refrigerant charging by a licensed HVAC technician.
Wall‑mounted vs ceiling cassette: which layout suits my home?
Wall-mounted indoor handlers are easier to retrofit and usually cheaper to install. Ceiling cassettes distribute air more evenly and are less obtrusive visually but require ceiling space and more complex installation. Choose cassettes for open plans and wall units for simple retrofits.
Controls, Wi‑Fi, and smart home integration
Decide if you need Wi‑Fi, app control, or voice assistants like Alexa. Smart integration enables remote schedules and energy routines but is optional for basic operation. Verify manufacturer support for your preferred smart platform.
Energy and refrigerant considerations
Look for Energy Star, high SEER2, and modern refrigerants like R32 if lower global warming potential is important. Higher efficiency reduces operating costs over time; refrigerant type affects environmental impact and future service availability.
Installation and electrical requirements
Confirm voltage (most listed models use 208-230V) and maximum fuse or breaker size stated by the manufacturer. Plan for professional installation by a certified HVAC technician for proper refrigerant handling and electrical connections.
FAQ
- Can a 4-zone mini split heat and cool simultaneously? No. Typical single-condenser multi-zone mini splits operate as heat pumps that either heat or cool based on the outdoor unit mode; individual zones can be set independently within that mode.
- Are line sets included with these systems? Some models list included pre-charged condensers and line sets (25ft or 16ft). Verify the product listing to confirm exact line set length and any additional kit components.
- Do these systems work in very cold climates? Several models specify low ambient operation (examples: Arctic heat pump to -22°F, rated to -13°F, or -4°F). Choose a model whose minimum operating temperature matches your climate needs.
- Is professional installation required? Yes. Licensed HVAC technicians should perform installation to handle refrigerant lines, electrical connections, and system charging where required by the product setup.
- How do I pick between 9K and 12K indoor handlers? Match handler capacity to room size and heat load. Use 9K for typical bedrooms and offices, 12K for medium living spaces, and 18K for larger open-plan rooms.
- Will Wi‑Fi or Alexa control save energy? Smart controls can enable scheduling and remote setbacks that reduce runtime, which can lower energy use when used to optimize operation, depending on thermostat strategies and occupant behavior.
How to Get the Best HVAC Prices
- Firstly, keep in mind that installation quality is always the most important thing for residential HVAC project. So never sacrifice contractor quality for a lower price.
- Secondly, remember to look up the latest rebates as we talked above.
- Thirdly, ask for at least 3 bids before you make the decision. You can click here to get 3 free estimates from your local contractors, and this estimate already takes rebates and tax credit into consideration and filter unqualified contractors automatically.
Lastly, once you chose the right contractor, remember to use the tactics from this guide: Homeowners Tactics When Negotiating with HVAC Dealer to get the final best price.
