Note: Before you dive into the specific brand review, we highly recommend you to read our elaborate Gas Furnace Buying Guide in advance. There are several crucial steps you need to take before you even start to think about the brand.
Janitrol was an American brand of heating and air conditioning products. Initially filing the first trademark for its heating and AC division back in 1930, Janitrol originally operated as an HVAC contractor beginning in 1954 before starting manufacturing of their own air ducts. The company eventually began manufacturing a line of residential and commercial air conditioning units, furnaces and heat pumps, all of which were considered by homeowners to be a cost-effective option to other units on the market at the time.
In 1982, just as Janitrol was preparing to fold, the company was purchased and acquired by Goodman Manufacturing Co. as its first foray into the world of HVAC. Goodman manufactures HVAC products under the Janitrol name for the next ten years until 1992, when the company dropped the use of the Janitrol name. The brand was subsequently consolidated under the Goodman brand name which itself was acquired by HVAC heavyweight, Daikin Industries Limited in 2012.
Though Janitrol HVAC products are no longer manufactured, there are still many units still in operation today. Because of this, and given the age of these units, Janitrol parts are still available from a number of dealers.
Units sold at the time of manufacturing were grouped in three categories: the PG Series, the PGX Series, and the PGB Series. The PG and PGX series had AFUE ratings of up to 78%, while the PGB series reached up to 80% AFUE and included Janitrol’s highest efficiency model. All models were residential packaged systems used for both heating and cooling.
During the time Janitrol manufactured their own line of HVAC products, they were commonly known as budget and cost-effective units. Compared to other furnaces on the market Janitrol gas furnaces were inexpensive and as a result, they carved out a niche at the time. A cost effective unit like a Janitrol furnace was great as a short-term solution or for heating a small home in a warmer climate that didn’t require much use.
– Fully Insulated Cabinets
Janitrol’s Pg and PGX series of furnaces featured fully insulated cabinets and top condenser discharge. The insulted cabinets meant that models in both of these series ran relatively quiet, even for low-efficiency staged furnaces.
– Low NOx
The PG and PGX series furnaces weren’t that different from each other except for the low NOx (nitrogen oxide) emissions of the PGX. This was done in order to meet California’s NOx emissions standards set in place at the time. Because of California’s problematic air quality, furnaces sold there were subject to more stringent standards. The low NOx emissions of the PGX was the response to those stricter guidelines.
– Parts and Repairs
Though Janitrol no longer manufactures HVAC products or gas furnaces, their parts are still available through some contractors. As a result, there are still many Janitrol furnaces operating in homes across America today that can and will be repaired with new parts to continue use as long as possible. This is a testament to the long-term reliability and durability of Janitrol’s furnaces as well as Goodman’s commitment to continue servicing them.
Janitrol Gas Furnace Price Submitted
|Brand & Model & SizePriceHome LocationHome Size|
|GMP075-3$1,900Phoenix, AZ2000 sqft|
|I’ve had this furnace since I bought this house four years ago. I had paid no attention to furnaces until I finally became a homeowner. After going through online reviews, I finally settled for the Janitrol Standard Gas Furnace. I like the fact that it has worked consistently well for the past four years and has very low maintenance costs. So far, I’ve only had to change the filters. The furnace also consumes very little gas and keeps the house warm. It is quiet and produces no noticeable noise. I would definitely buy the unit again and I recommend it to all my friends.|
|GMP075-3$1,600Cedar, MN2400 sqft|
|I had no knowledge abou gas furnaces, and I landed on the Janitrol two years ago out of sheer luck. I purchased the unit at quite a fair price and hired a local installation company to do the honors. Two years down the line, I can gladly say that this one was one of my best purchases. I’ve never seen anything work so well. The unit keeps the house warm during winter; it barely produces any noise and consumes little gas. After the purchase, the gas bills went down by 30%. The installation guys advised me to do an annual inspection and cleaning of the unit. I did one last year that cost less than a hundred dollars.|
|I bought two Janitrol gas furnaces after a friend recommended them. I had one installed in my son’s house and the other in our home. The installation was done by a company that has been in operation for a long period . In less than two years, both of the units had the fan motors replaced. Although people kept suggesting that the problem was in installation, I just wondered how improper installation would cause a fan to fail.|
|I have a Janitrol unit installed three years ago, and I’m incredibly satisfied. The main reason I decided to choose Janitrol is the ten years warranty but I was also impressed by its quietness and the fact that it can warm up the house in just a short time. The unit saves on gas and electricity bills and has me thoroughly recommending it to everyone.|
|Not Submit$2,350MN1850 sqft|
|I’ve owned the Janitrol unit for four years now. It has been a great furnace and is very reliable. I’ve not had any repairs done since the purchase, and I only need to change the filters twice every year. I recently hired a technician to take a look at the furnace and his response was that it was as good as new. I would recommend Janitrol standard gas furnaces to anyone in the market.|
|Not Submit$2,300Apex, NC2500 sqft|
|I purchased the Janitrol Gas Furnace less than three years ago, and I’m already regretting the purchase. The unit regularly shuts off during winter. I’ve to manually turn the switch on and off for it to work again. I wouldn’t buy another Janitrol even if they were the only dealers left out there.|
How to Get the Best Janitrol Gas Furnace Prices?
- Firstly, keep in mind that installation quality is always the most important thing for a gas furnace project. So never sacrifice contractor quality for lower price.
- Secondly, remember to look up the latest tax credit and rebates.
- Thirdly, ask for at least 3 bids before you make the decision. You can click here to get 3 free estimates for you local contractor, and this estimate already takes rebates and tax credit into consideration and filter unqualified contractors automatically.
At last, once you chose the right contractor, remember to use the tactics from this guide: homeowners tactics when negotiating with HVAC dealer to get the final best price.
Feel free to ask any question by leaving a comment, we will answer any question with actionable tips.