American Standard Gas Furnace Prices, Reviews and Buying Guide

Note: Before you dive into the specific brand review, we highly recommend you to read our elaborate Gas Furnace Buying Guide in advance. There are several crucial steps you need to take before you even start to think about the brand.

American Standard is a heating and air conditioning brand that manufactures residential and commercial HVAC systems. Originally formed in 1929 under the American Standard Companies banner, they were responsible for not just HVAC systems, but vehicle control systems as well as their popular brand of bath and kitchen products. In 1984, the company acquired the HVAC brand Trane and ran all three divisions until 2007. It was at this time that the company sold off the other two divisions and renamed itself Trane. They continue to sell HVAC systems under the Trane and American Standard brands, though both are now owned by their parent company, Ingersoll-Rand.

American Standard is considered by most to be the affordable alternative to their flagship brand, Trane, and currently offer thirteen different furnace types within three different product lines: Silver, Gold, and Platinum. Like the names suggest, Silver is their least expensive series and Platinum is the most expensive, while Gold offers a mid-range option, though each has a different set of features. Here is a quick navigation of this guide:

American Standard’s Features

– Comfort-R

Unique to Trane brand gas furnaces, and thus, American Standard units, Comfort-R is a feature designed to reduce moisture and humidity while also providing even heating throughout the home. The Comfort-R setting is designed to allow the blower fan to speed up slowly while the compressor loads. In this case, as it speeds up further, temperatures increase and moisture is removed more thoroughly.

– Hot Surface Igniter

A durable hot surface igniter allows the burner to start electronically and safely for highly efficient operation. Unlike a standing pilot light that requires fuel for it to stay lit, the inclusion of a hot surface igniter means that there is no unnecessary gas wasted while the furnace is not in use. It’s not only an effective alternative to the standing pilot, but a safer one that won’t add unnecessary heat to the furnace during the warmer months while it’s lit.

– Vortica II Blower

Exclusively available in Trane products and those under the Trane umbrella of brands, the Vortica II blower helps American Standard furnaces improve on air flow and noise reduction. This Vortica Advanced Air System is built using strong composite materials that resist rust, corrosion and cracking for increased durability. It also requires less fan power and, as a result, makes American Standard gas furnaces highly efficient with lower energy use. Finally, the Vortica II blower is quiet and allows for a level of comfort noticeable in not only the temperature but also in noise reduction.

Compatible with Nexia Home Automation systems

American Standard Model Recommendation

When you’re looking for the most cost-effective American Standard model, the strategy is to find the balance between furnace cost and energy costs. Let’s use the zone map to identify efficiency levels for each that strike that balance:

Zone
Suggested AFUE
Cost-effective American Standard Models
Zones 1 & 2 (hot)80%
SLIVER 80H,GOLD 80/80V
Zone 3 (warm)80%
PLATINUM 80
Zone 4 (moderate)90%
GOLD S9V2, PLATINUM 80
Zone 5 (cool)90%-93%
GOLD S9V2, SLIVER 95/95H
Zone 6 (cold)92%-95%GOLD 95V/95
Zone 7 (very cold)95% and upPLATINUM 95

American Standard Gas Furnace Prices By Model

We need to set an equal baseline before we can list the prices for each American Standard model. In this list, each furnace includes the same parameters: 70,000-75,000 btu with 1000 cfm blower which is proper for a mid-sized home of around 2,000 square feet, 10 year warranty exclude labor fee.

The Unit Only price is the online wholesale price without shipping fee. The Unit Installation Cost include gas furnace unit, all the material for the house and labor fee.

Models
Unit Only
Unit Installed Cost
PLATINUM 95$2,050
$4,200
GOLD 95V/95$1,950
$4,100
SLIVER 95/95H$1,900
$4,000
GOLD S9V2$1,600$3,500
PLATINUM 80$1,300$2,650
GOLD 80/80V$1,250$2,600
SLIVER 80H$1,200$2,500

American Standard Gas Furnace Price Submitted

Price
Brand & Model & Size
Home Location
Home Size
$2,900Platinum ZVPhoenix, AZ2200 sqft
About four years ago, I had a 91 % American Standard furnace installed in my newly constructed home. As of today, I had never had it serviced yet it works as well as it did when I first purchased it. These furnaces are also quite popular in my neighborhood. As yet, I haven’t heard anyone complaining. I can’t express the joy of having a quiet, dependable and efficient furnace enough.
$2,600Platinum SVFt. Worth, TX2200 sqft
I had the 95% efficient, two-stage, American standard furnace installed less than six months ago. The installation was fine. However, when the furnace was first run, it sounded more like an airplane on the runway. To reduce the noise, the technician adjusted the dip switch to the lowest setting. After the technician had left, the furnace was still running as loud and became quite bothersome. A few months later I hired a different installer, but he offered no additional help. Upon inquiry, I was told that it was a ‘normal’ thing for the speed furnace. SAD.
$2,300Platinum 95Edmonton2500 sqft
I had my old American Standard furnace replaced a few months ago with a newer model of the same brand. It was still working fine, and the only reason I had it replaced was because I knew that it was quite old. I found the serial number after it was removed and did a search, only to realize that it was more than thirty years old. Quite phenomenal! I hope that the newer model functions as well.
$3,200Gold S9V2Atlanta, GA3340 sqft
I had the six ultras 95 installed in my home two years ago by a certified installer. It has been running amazingly since then. I have devoted myself to yearly servicing and maintenance. I also change the filters according to usage. I use a Nest thermostat to warn me when to change filters based on usage. I also constantly check the water lines for leaks. My advice to any owner of this product is to take maximum care.
$2,350Gold ZMFlorence1850 sqft
I have been an American standard user for three years now. I have come to realize that the installation process is critical and makes the difference. My advice for buyers would be to invest in quality installation companies if they are to enjoy the efficiency of the product.
$2,900Platinum 80Atlanta, GA2100 sqft
The American Standard furnace was installed in my house about three years ago and runs without any problems whatsoever. It’s efficient, quiet and heats up well. I couldn’t ask for a better furnace.

How to Get the Best American Standard Gas Furnace Prices?

  • Firstly, keep in mind that installation quality is always the most important thing for gas furnace project. So never sacrifice contractor quality for lower price.
  • Secondly, remember to look up the latest tax credit and rebates.
  • Thirdly, ask for at least 3 bids before you make the decision. You can click here to get 3 free estimates for you local contractor, and this estimate already takes rebates and tax credit into consideration and filter unqualified contractors automatically.

At last, once you chose the right contractor, remember to use the tactics from this guide: homeowners tactics when negotiating with HVAC dealer to get the final best price.

Feel free to ask any question by leaving a comment, we will answer any question with actionable tips.

0 comments… add one

Leave a Comment

DMCA.com Protection Status